Denne webside anvender cookies for at give en bedre brugeroplevelse.

Analogt shore-hårdheds-durometer HBA 100-0

Varenr. 6284083
Shore hardness testers, analogue, HB Compact handheld durometer for plastics with drag indicator. -Typical application: measurement of penetration (Shore) -Material thickness of the sample, min. 4 mm -Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN
Dette produkt kan ikke bestilles i øjeblikket.
Beskrivelse

Shore hardness testers, analogue, HB
Compact handheld durometer for plastics with drag indicator.
-Typical application: measurement of penetration (Shore)
-Material thickness of the sample, min. 4 mm
-Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances
-Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials and Shore D for plastics, formica, epoxides, plexiglass etc.
-Max mode: Holds the maximum value in the display
-Point mode: Shows one instant value
-Can be attached to the test stands TI-A0 (for Shore A) and TI-D (for Shore D)
-Screws to screw on to the TI: M7 fine thread
-Delivered in a wooden carrying case

Specifications
Precision: 3 % of measured value
Dimensions (L x W x H): 60 x 25 x 115 mm
Net weight: approx. 160 g
Measuring range: 100 HA HS
Readability: 1,0 HA HS

 

Type HBA 100-0

Specifikationer
Producent Kern & Sohn
UNSPSC 41114611 Hårdhedsmålere
Pakningsstørrelse 1 stk.
    Loading
    Loading