Flame Photometer FF-200D-I from Cole-Parmer

Use this economical flame photometer for routine determinations of sodium and potassium in industrial and educational applications. The fine and coarse adjustment controls provide accurate measurements every time. For safety, an automatic gas shutoff mechanism activates if the flame becomes accidentally extinguished.

Fitted with automatic flame failure detection for user safety, making it ideal for use in clinical, industrial and educational applications.

• Unit comes with Na⁺, K⁺, Li⁺, Ca⁺, and Ba⁺ filters
• Low temperature
• Single channel
• Electronic flame failure detection
• Fine & coarse sensitivity controls
• Operates on propane, butane, natural gas or L.P.G. supplies
• 230 V operation
• 3 year warranty

Please Note: Effective June 2022, the Jenway Economical Flame Photometer PFP7 (Model number 500701) has now been rebranded Cole-Parmer under Model number FF-200D-I. All the same great features and specifications, just with a new and improved look.

Supplied with: Electronic flame fail safe, Na, K, Li, Ba & Ca filters, connecting hoses and clips, compressor plug, drain trap, fuses and operating/service instructions

Specifications:

• Ranges:
  • Na/K: 3 to 100 ppm
  • Ca/Li: 5 to 100 ppm
  • Ba: 100 to 200 ppm
• Specificity: <0.5 % interference when concentrations are equal to test sample concentrations.
• Linearity: Better than 2 %
• Reproducibility: Better than 1 % CV
• Reading stabilization: Approx. 8 seconds
• Aspiration rate: 2 to 6 L/min at 14 psi; oil and moisture free.
• Display: 3.5-digit LED; 12.5 mm (½ inch) height
• Fuel supply: High-grade propane/butane, or propane/butane mixture regulated at approx. 0.36 psi; natural gas at 3 to 10" W.G.
• Dimensions (W x D x H): 36 x 30 x 42 cm