Shaking Water Bath 1083
With Reciprocating Motion.
Universally applicable for shaking tasks that require exactly reproducible temperatures. For gentle mixing or vigorous shaking. Microprocessor controlled temperature regulation. Temperature display and setting via LED display in 0.1°C increments. Temperature range approx. 5°C above ambient to +99.9°C, alternatively after installation of water level regulator 1919 (accessory) approx. 3°C
above tap water temperature to +99.9°C.
Optimum temperature distribution throughout the whole bath interior.
Overtemperature cut-out: electronic, 4°C above set temperature, and electro-mechanical >130°C. Electronic monitoring of the temperature controller. Maintenance-free and durable shaking device, electronically controlled and continuously adjustable from 10 to 250rpm, with soft-start. Constant shaking frequency, independent of load, even when in continuous operation. All parts in contact with water made of stainless steel. No dripping back of condensate into the vessels due to double-walled insulating lid with internal gable. Corrosion-resistant housing is made of powder-coated, electrolytically galvanized sheet steel. Accessories to accept various kinds of vessels are quickly and safely attachable to the shaking device. Easily removable shaking rack. A drain tap is provided to empty the bath.
Tested according to the German Equipment Safety Law and CE marked.
External dimensions (W x D x H): 715 x 520 x 330mm
Internal dimensions (W x D x H): 450 x 300 x 160mm
Usable capacity: 20 litres
Usable bath height: 190mm
Net/gross weight: 28/32kg
Shaking motion: Reciprocating, can be switched on / off
Temperature constancy (temporal): &plusminus;0.1°C
Temperature display: Digital LED
Overtemperature cut-out: electronic 4°C above set temperature, and electro-mechanical > 130°C
Shaking frequency: 10 to 250rpm.
Shaking amplitude: 22mm
Supply requirements: 230V 50/60Hz, 1.5kW (alternative voltage models are available, details on request)